Everymate Parallettes Review: The Assembly Step Amazon Never Mentions
If your wrists are the reason you stopped doing push-ups, you already know the problem. It isn't your chest and it isn't your conditioning. It's that flat-palm position, wrist bent back to ninety degrees, taking your whole bodyweight for thirty or forty reps. Somewhere in your thirties that stops being free.
Parallettes fix that. Two short bars, a neutral grip, wrists stacked straight over your forearms, and the movement you gave up on is suddenly available again. They are also one of the few pieces of home gym equipment that costs less than a decent pair of shoes and takes up less floor space than a gym bag.
So when a pair of Everymate parallettes showed up at my house, I filmed the whole thing. And I found something in the first three minutes that is not mentioned anywhere on the Amazon listing.
Watch the full unboxing and build here: Everymate Parallettes Review
Why I Tested This
I've had a home gym for over ten years. When you train in your own space long enough you stop being impressed by big equipment and start caring about the small stuff that earns its square footage. A rack is a rack. But a pair of bars that live under a bench and let you train pressing, core and handstand work is a different kind of value.
Everymate is a factory-direct brand out of Shandong, China. I've now put four of their products through this channel, and the pattern is consistent: the gear is usually better than the price suggests, and the listing is usually worse than the gear. This one holds to that.
The other reason is that almost nobody has covered these. Sixty-four ratings, no Reddit threads, no long-form video. If you searched for a real look at these before today, you didn't find one.
What You Actually Get
Everything below is from the live Amazon listing, checked on September 8, 2026.
Price: $31.99 on the day I published this, September 8, 2026. Amazon moves prices on this listing constantly, so treat every dollar figure in this review as a snapshot from that date and not a current quote. Check the listing before you buy.
A 1.57 inch beech wood grip. This is the spec that matters most and it's the one people skim past. The category standard is 1.5 inches, and the cheap plastic stuff runs closer to 1.25. Going fatter spreads the load across more of your palm, which is exactly what you want if wrist and hand pressure is why you're shopping in the first place. Solid beech, not a veneer over a dowel.
13.3 inches long, 8.8 inches wide, 5.9 inches tall, per bar. Read that height twice. Five point nine inches is a low parallette. That's the right height for L-sits, planche leans, deficit push-ups and handstand entries. It is nowhere near dip height. If you came here looking for dip bars you need something in the twenty-four inch range, and these are not it.
Steel A-frame brackets with rubber feet. The listing calls it heavy-gauge steel and describes the wood-to-metal junction as burr-free, which matched what I found. There's no sharp edge where your hand runs off the end of the wood.
A stated 600 pound capacity. More on that below, because the listing does not tell one consistent story about it.
Two sizes on one listing. The pair I have is the larger one, 13.3 by 8.8 by 5.9. There's a smaller version at 10 by 5.9 by 4.7 for a couple dollars less. Same photos, same title, same everything except the dimensions buried in the spec table. If you buy these, check which size you're clicking.
No published item weight and no warranty term. Amazon lists the warranty type as "limited" and stops there. There is no stated length.
What It Was Like Out of the Box
Here's the part I did not expect.
They arrive in pieces. Not "snap the feet on" pieces. Actual pieces, with a folded instruction sheet, a bag of screws, rubber end caps, bolts, washers, and a little Allen wrench with a screwdriver on the other end.
The instructions are clear enough. Screw the wood screws into both ends of the wooden bar but leave them loose. Rotate the bar to line the screws up with the brackets. Set the whole thing on a flat surface and tighten each screw a bit at a time, checking that the bar stays parallel to the ground as you go. Then the end caps, then a bolt and washer on each end, tightened down with the Allen wrench.
None of that is hard. It's maybe fifteen minutes of work if you take your time. But it is work, and the tool they include is slow. Partway through I said out loud on camera that it would be much faster with a drill, and then a minute later I stopped, walked off, and got the drill. Way faster.
That's a good build for thirty dollars. It's also a build nobody told me about.
The Thing Nobody Tells You Before You Buy
I went back through the entire Amazon listing looking for any mention of assembly. Here's what's there.
The title: no mention. All five bullet points: no mention. The full spec table: no mention. The words assembly, screw, tool, wrench and installation appear nowhere on the page. What the listing does say, in one of the bullets, is that "the unique fixation structure boosts stability during high-intensity movements." That's the closest it gets to telling you there are fasteners involved, and you'd have to already know the answer to read it that way.
This is not a scandal. It's a fifteen-minute build with a hex key. But there's a real difference between a buyer who expects a kit and a buyer who thinks they're getting bars they can use the moment the box opens. One of those two people leaves a one-star review, and it isn't the product's fault.
For contrast, Rogue's Formed Parallette Set spells out "requires no assembly" right on the product page. That's a $95 product as of September 8, 2026, so it isn't a fair comparison on price, but it is a fair comparison on disclosure. Saying what's in the box costs nothing.
The second thing on that page that doesn't add up is the weight capacity. The title and the bullets both claim 600 pounds, which the bullet restates as 275 kilograms. Those agree with each other. But scroll to Amazon's own spec table on the same listing and the Maximum Weight Recommendation field reads 400 kilograms, which is roughly 882 pounds.
So the page gives you two different numbers, and the bigger one is nearly fifty percent higher than the one printed in the product title. I did not load-test either figure and I'm not going to pretend I did. What I'll say is this: for the movement these bars are actually for, both numbers are far past anything you'll put through them. A 250 pound guy doing deficit push-ups is loading maybe 180 pounds across two bars. The capacity claim is not the reason to buy or skip these. But a listing that contradicts itself on its own headline spec is worth knowing about before you trust the rest of it.
One more note on the ratings. The 4.2 star average comes from 64 ratings pooled across both sizes. It is not the rating of the specific pair you're clicking.
Real World Use
Once they were built I went to try them out, and the first thing that happened is they didn't fit where I'd planned to use them. So I put them on the floor and did the thing you do with parallettes.
They're solid. That was my first word and it's still the right one. No creak in the wood, no flex I could feel, no skating across the mat. The A-frame geometry is wide enough that they stay put under a real push-up instead of rolling the way a cheap round handle does. The grip is genuinely comfortable, and the fat diameter does what a fat diameter is supposed to do: my wrists stayed neutral and nothing pinched.
Heavy duty is how I described them on camera and I'll stand behind that after one session. What I won't do is tell you how they hold up, because I don't know yet. One session is one session.
Here's what I have not tested, and I'd rather say it than imply otherwise. I haven't sweated my hands and checked whether smooth unfinished beech gets slick, which is the single most common complaint across every wooden parallette on the market. I haven't put a caliper on the grip to confirm the 1.57 inches. I haven't weighed them. I haven't checked whether the screws stay torqued after a few months of load. Those are the follow-up video, and they're the reason to stay subscribed rather than take my word for it today.
Pros and Cons, Real Talk
Pros
The 1.57 inch beech grip is genuinely thicker than the category standard and it makes a difference for wrists
Solid under load with no wobble on a rubber mat
Wood doesn't compress, peel or get sticky the way foam handles do
Small enough to live under a bench and cheap enough that they don't have to earn a spot
Burr-free where the wood meets the steel, which is a detail cheaper sets skip
Cons
They arrive as a kit and the listing never says so
The included Allen wrench is slow enough that I went and got a drill
The listing states two different weight capacities on the same page
At 5.9 inches tall these are not dip bars, and the marketing photos don't make that obvious
Two sizes hide under one listing with identical photos, so it's easy to order the wrong one
No published item weight and no warranty term
→ Grab the Everymate Parallettes here
How It Compares
The honest comparison for these is not Rogue. Nobody cross-shops a thirty dollar wooden set with a ninety-five dollar steel one. The real comparison is the floor, and a set of ten dollar plastic push-up handles.
Against the floor, this is the whole point. Neutral grip, wrists stacked, extra range of motion at the bottom, and access to L-sits and handstand work that flat hands simply don't give you.
Against plastic handles, the difference is contact area and stability. Small round plastic grips concentrate load into the base of your fingers and tip when you shift your weight forward. A wide wooden bar in a steel A-frame does neither.
If you do want the Rogue comparison for reference: as of September 8, 2026 the Rogue Formed Parallette Set runs $95, with a 1.5 inch steel tube and a 13.5 inch height. That's a taller tool with a thinner grip, made of steel instead of wood, and it ships assembled. Those figures are from that date and prices move, so the shape of the comparison is what matters and not the exact dollars. Different tool, different buyer, and worth the money if that's the tool you need. For the guy who wants to do push-ups without his wrists complaining, it's more than he needs to spend.
Who This Is For
Anyone whose wrists have quietly ended their push-up habit
Small home gyms where every piece has to justify its footprint
Beginners working toward L-sits, tuck holds and handstand entries
Anyone who'd rather grip wood than foam or plastic
People who don't mind spending fifteen minutes with a screwdriver
Who Should Skip It
Anyone shopping for dip bars. Six inches is not dip height
Anyone who wants gear that works the second the box opens
Advanced calisthenics athletes who need adjustable height or a higher platform
Anyone who needs a documented, warrantied load rating for their training
Frequently Asked Questions
Do the Everymate parallettes require assembly?
Yes, and this is the part the listing leaves out. They arrive as a kit with wood screws, bolts, washers, rubber end caps and a small Allen wrench. Expect about fifteen minutes per pair. A drill or power screwdriver makes it substantially faster than the included tool.
How tall are they?
5.9 inches for the larger size. That's a low parallette, suited to push-ups, L-sits, planche leans and handstand entries. It is not tall enough for dips, which generally need something in the twenty-four inch range.
Can you do dips on them?
No. At six inches off the floor there is nowhere for your legs to go. If dips are the goal, buy a dedicated dip station.
What is the grip diameter?
The listing states 1.57 inches, or 40 millimeters, in solid beech. That's thicker than the 1.5 inch category standard and considerably thicker than budget plastic handles. I have not verified it with a caliper myself yet.
How much weight will they hold?
The listing is inconsistent. The title and bullets claim 600 pounds, or 275 kilograms. Amazon's spec table on the same page lists a Maximum Weight Recommendation of 400 kilograms, roughly 882 pounds. I have not load-tested either number, and for the movements these are built for, both are well beyond what a person will put through them.
Which size should I buy?
Two sizes sit under one listing with identical photos. The larger is 13.3 by 8.8 by 5.9 inches. The smaller is 10 by 5.9 by 4.7. Check the dimensions in the spec table before you click, because the titles are the same.
Are they slippery?
I don't know yet, and I'd rather say that than guess. Smooth unfinished beech going slick with sweaty hands is the most common complaint across the whole wooden parallette category. That test is in the follow-up.
The Verdict
After one session, I think they're worth giving a shot, especially at that price. That's what I said on camera and it's what I'll say here.
What you're getting for around thirty dollars is a genuinely thick wooden grip on a stable steel frame, a piece of equipment that takes up almost no room, and a way back into a movement a lot of guys have quietly given up on. The build is real but it's fifteen minutes. The listing is sloppy, but the product under it isn't.
Scripture puts physical training in its place. Paul told Timothy it's of some value, and then pointed at what matters more. That's about right. A pair of parallettes will not make you a better husband or a better father. But staying strong enough to carry your kids, move your own furniture and still be useful at sixty is part of the job, and the tools that keep you consistent are worth having. This is one of the cheap ones that works.
I'll put an updated review out after these have taken some real volume, because a first impression is exactly that.
→ Grab the Everymate Parallettes here
→ Start the 7-Day Dad Reset, free download
Big Mike Behrens personally tests every product before recommending it. No paid promotions, no sponsored opinions.
